Todas as mensagens

BG161653415 you have to run it straight from vbat not from bec, they don't have enough power for it.

nitram78 26/06/2021
1
Comentários (4)
BG161653415 28/01/2022
it arrived one day after the expected delivery date, well done BG! Tried and tested it, and it is all working great. As you can see, I have already modded it a bit. I've added the CNC parts for the radiomaster, well, all of the parts that would fit anyway. None of the buttons or the pots are the same sizes so couldn't change them, also the gimbal face plates are completely different, not just the holes in them either, so I couldn't use them. But the folding handle, the switch surrounds, the wheel, and the stick ends all fit perfect. The gimbal spacers that I have put in from the CNC pack fit but are out by fractions of a millimeter, so not quite perfect but won't affect the controller at all. I have also added the leather grips from radiomaster too as you can see in one of the pics, I prefer the feel of them but the original rubber grips are a nice feel too, very close! One tiny little problem, though, is that the screen protector was about 1mm too big, so it wouldn't lay flat all along one long side and part of one of the small sides. I just peeled it back off as carefully as I could and cut off a little bit with scissors which is why mine doesn't look the best as I was trying to not touch the underside with my fingers while not peeling it all the way off so it didn'tget dirty. So if you are going to use the screen protector, then make sure it fits yours before you peel off the backing, and if it doesn't, then trim it before removing the backing too! All in all I am very happy with this controller, feels really solid, looks great (especially with my extras that I added), and was a great price when I payed for it (about £120 which is a complete bargain!). Just got to install Edge TX on it now, and I am all set!
2
Recomendações
Comentários (1)

BG161653415 oh and I upgraded from the flysky x10 and there is just no comparison. I wish I had held out and just bought this at the beginning!

BG161653415 28/01/2022
it arrived one day after the expected delivery date, well done BG! Tried and tested it, and it is all working great. As you can see, I have already modded it a bit. I've added the CNC parts for the radiomaster, well, all of the parts that would fit anyway. None of the buttons or the pots are the same sizes so couldn't change them, also the gimbal face plates are completely different, not just the holes in them either, so I couldn't use them. But the folding handle, the switch surrounds, the wheel, and the stick ends all fit perfect. The gimbal spacers that I have put in from the CNC pack fit but are out by fractions of a millimeter, so not quite perfect but won't affect the controller at all. I have also added the leather grips from radiomaster too as you can see in one of the pics, I prefer the feel of them but the original rubber grips are a nice feel too, very close! One tiny little problem, though, is that the screen protector was about 1mm too big, so it wouldn't lay flat all along one long side and part of one of the small sides. I just peeled it back off as carefully as I could and cut off a little bit with scissors which is why mine doesn't look the best as I was trying to not touch the underside with my fingers while not peeling it all the way off so it didn'tget dirty. So if you are going to use the screen protector, then make sure it fits yours before you peel off the backing, and if it doesn't, then trim it before removing the backing too! All in all I am very happy with this controller, feels really solid, looks great (especially with my extras that I added), and was a great price when I payed for it (about £120 which is a complete bargain!). Just got to install Edge TX on it now, and I am all set!
2
Comentários (1)

Q: Any motor skids for this arm?

perguntado por FyturboQuad sobre 2020-12-20 05:38:06

BG161653415 have a look on flea Bay as there are usually people selling 3d printed sets. they are exactly the same as the impulse apex ones as this is a clone of that

2022-01-27 05:30:26 Útil (0)
Enviar
respostas (2)

Q: Way too expensive. it's half the price of the whole Radiomaster 😆

perguntado por dready75 sobre 2020-10-20 04:35:31

BG161653415 I just bought these in England for £20 less. Just Google drone shops in UK and you should be able to find it easy enough, there are only about 4 shops lol it is one of the main ones if anyone is interested

2022-01-20 03:11:55 Útil (0)
Enviar
respostas (8)

Q: Hello, did it comes with PDB? And Did it have VBAT connection?

perguntado por TheЦентурион sobre 2020-06-02 11:14:00

BG161653415 no separate pdb as you don't get them with fc's any more really, it's all built in. Yes to vbat, but it is called vcc.

2022-01-19 05:41:40 Útil (0)
Enviar
respostas (3)

Q: hello, Can I connect a GPS module on this product?

perguntado por asuka15 sobre 2019-06-18 07:12:10

BG161653415 you can but there aren't many uarts so finding a spare one can be tricky if you need them for everything else. I recommend an f7 flight controller if you need more uarts as they usually have 5 of them instead of 3 or less on the f4 fc's.

2022-01-19 05:33:54 Útil (0)
Enviar
respostas (25)

Q: could expand storage with 2.5 inch ssd instead of hard drive?

perguntado por eduardo_pc87 sobre 2021-08-03 05:59:28

BG161653415 yes, a 2.5inch ssd will fit in the hdd bay. mechanical hdd's and ssd's are both hard drives and are interchangeable as long as you buy the sata versions. same fixtures and everything.

2022-01-19 05:31:51 Útil (0)
Enviar
respostas (2)

Q: is it unibell ?

perguntado por sivva1991 sobre 2021-03-31 11:35:08

BG161653415 only in the pictures. well, I got the 2750kv ones and they aren't unibell, but don't know about the other ones

2021-04-02 10:05:58 Útil (1)
Enviar
respostas (2)

Q: is this transmitter able to connect to the MAMBA f405 stack?? ( for fpv uses )???

perguntado por BG351355223 sobre 2021-04-02 06:40:16

BG161653415 As long as you use a receiver then that will connect the transmitter to the stack, the same with almost all stacks sold separately. get the x6b receiver option as it has the best range and dual antennas. Do not get the other two receivers as one won't work with a kwad stack and the other has only got a couple of hundred meter range. hope this helps.

2021-04-02 10:02:07 Útil (1)
Enviar
respostas (4)

BG161653415 Ifit is too high you can trim the gummies slightly to reduce the space between the boards. There is loads of space between them so you should be all good, if you are worried about them touching then you can use electrical tape between them or some of the sheets you can buy on site here that go between them to stop shorts.

Viết Trung Phan 19/09/2020
0
Comentários (1)

BG161653415 the pigtail is SMA, but you can buy an RP-SMA to mmcx pigtail and it works fine, I did it and the pigtails are only a few quid even if you get them locally

2021-02-21 07:09:05 Útil (1)
Enviar
respostas (2)

BG161653415 I checked mine before using it with my multimeter, it is not grounded on the mounting holes and there is no continuity between the mounting holes either. it is fine to use with metal screws

2021-02-21 07:03:20 Útil (0)
Enviar
respostas (2)

BG161653415 Make sure you are using the latest version of BLHelisuite. And remember you have to plug the battery in to read the esc's as they don't receive power from the usb.

2021-02-21 05:16:15 Útil (0)
Enviar
respostas (2)