Todas as mensagens

Q: ehm, no thanks.

perguntado por Bugg69 sobre 2018-08-28 06:25:34

SLaPPiE No telemetry? No LED? No current output? Price? Perhaps he does not like blue! No for real, the Dys 35a have nice features missing here for the same kind of money.

2018-08-28 08:40:10 Útil (0)
Enviar
respostas (3)

Q: Does anyone have an amp reading on 6 X 4 prop on three cells or more?

perguntado por SLaPPiE sobre 2018-08-03 05:55:16

John Maybe you can use the "contact us" to contact the banggood customer service team.

2018-09-06 04:13:08 Útil (0)
Enviar
respostas (1)

SLaPPiE Hey, you must hook the compass to the sda/scl and make sure the resource is set up for that, i cant remember but I think its tx6 and rx6 that can also be sda/scl.Also the gps goes from tx on the gps to rx on the fc and gps rx goes to tx on the fc. I think rx/tx3. Start by connecting 5v and the gps, then hook up the mag. Later. On more uart would be handy for telemetry, so i had to drop the mag. Inav says you dont need it with gps heading.

2018-07-03 07:10:54 Útil (0)
Enviar
respostas (2)

Q: And the weight is 24 grams

perguntado por SLaPPiE sobre 2018-05-04 09:11:14

mu2004 24.4g without standoffs. This weight includes all the carbon boards, and 4 aluminium pillars and 8 M2 screws.

2018-05-29 04:54:07 Útil (0)
Enviar
respostas (1)

Q: What is the white connector for? Satellite RX?

perguntado por spinningweb sobre 2018-04-10 04:50:55

SLaPPiE Look here. That is the pwm connector for the escs. Why is this one more. Looks like the exact same board. https://www.banggood.com/Omnibus-F3-NANO-STM32F303-2-4S-Flight-Controller-20-20mm-3-7g-Built-in-5V-3A-BEC-OSD-LC-Filter-for-RC-Drone-p-1202565.html?rmmds=search&cur_warehouse=CN

2018-05-02 07:52:40 Útil (0)
Enviar
respostas (1)

SLaPPiE If you are going to use Betaflight, which is preloaded, you can youse the IMPULSE RC Driver fixer to put the board into DFU mode to flash the latest Betaflight. This way you only need a usb connection from pc to fc.

2018-05-01 09:50:46 Útil (0)
Enviar
respostas (2)

SLaPPiE Just got mine, only thing the same as the pictures is the word Forester. Has 2mm standoff posts about 23mm long. The camera mount looks better. The frame does not have those tabs on front of camera. Looks more like a qav design. Anyway, I weighed it without the included fc stack standoffs. 24 grams I like it, but it looks a tad fragile, so I will probably acro it, trying not to carsh it. Will post review once airborn.

2018-04-30 10:09:31 Útil (0)
Enviar
respostas (3)

Q: Weight?

perguntado por SLaPPiE sobre 2018-04-09 07:54:02

Zibberman2003 I'd say it looks between 36g-50g. I wonder if I'm close.

2018-04-16 03:30:59 Útil (0)
Enviar
respostas (1)

SLaPPiE You can power the fc through the vcc wire on the esc jst plug, however if you are using much current I would power with a little larger wire through the bat pads. You do not power the board with a bec. You may now have a problem. Check your soldering

2018-03-23 07:58:54 Útil (0)
Enviar
respostas (3)

Q: Does this VTX support changing frequencies through the BetaFlight OSD?

perguntado por kah00na sobre 2017-12-22 10:01:41

SLaPPiE I assume it does. It has u3rx and u3tx pins. I hope so, because setting up with the crappy button and location kind of stinks. I will try to mess with that at some point.

2018-02-08 04:06:25 Útil (0)
Enviar
respostas (3)

Q: 16 Channels, 2 switches ???

perguntado por Ketsa sobre 2018-01-28 02:09:36

SLaPPiE Best question so far. I think it can work for racer, but I would prefer same as qx7. I might understand the less to break logic, and these are some macho looking switches. So while we are at it. How about radio companies make the upper switch portion of radios removable. Make them have gobs of switch to slider to button options, then only include two on the base models. Plus you could sell populated tops, plug and play in different layouts. Make it so all switch positions can be interchanged and begin at 3 way. Just what i want.

2018-01-29 07:58:36 Útil (0)
Enviar
respostas (1)

Q: 3100kv max prop size on three cells

perguntado por SLaPPiE sobre 2018-01-07 07:13:27

Marli1 5 Inch

2018-02-01 03:47:46 Útil (1)
Enviar
respostas (1)

SLaPPiE Just update the firmware first. You have to make a little adapter cable if you want to flash it with your taranis. I have had good luck with two different f3 fc, omnibus f3 target on both though. You will have smartport on one uart to handle the radio functions wired to your fc rcin (serial rx), and s-port on a seperate uart (TX2)for telemetry (s.port). Your fc is an omnibus f3, so you should have no problems. Make sure you enable telemetry in the configuration tab, fire it up, go to your radio telemetry screen and search for new sensors. Battery needs to be plugged in on some fc to get VFAS voltage sensor to come up.

2017-12-16 08:12:01 Útil (1)
Enviar
respostas (3)

SLaPPiE Are you using the betaflight passthrough method where you connect to controller, disconnect, but leave betaflight open, then open blheli? Have you tried the atmel and silabs passthrough in blheli?

ZenJsan 2017-10-01 10:57:22
0
Comentários (3)

SLaPPiE Hi, lots of questions...How did you power the board? Through the vcc on the pwm connector with full battery voltage?Did the board come flashed with betaflight 3.2? If not, did you short the boot pin to the 3.3v pin next to it to enter boot mode?

RagTheNutsOff 2017-09-27 21:49:16
10
Comentários (5)