qnub
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

MINI TS100 Digital OLED Interface Programável DC5525 Estação de Ferro de Solda Versão Sapphire
US$56.19 US$74.43

Q: Does it come with the stand as shown in the pictures?

perguntado por qnub sobre 2017-12-19 04:26:48

Rickshaw The stand is not included. I bought one a few days ago. I like it very much.

2017-12-25 03:31:32 Útil (1)
Enviar
respostas (6)
qnub 24/10/2018
When it works, it's a very good motor on 6s, smooth and strong. I never crashed the quad, the only two mishaps so far were when I caught a stray branch, disarmed, and the quad fell from eye level to soft ground (grass) with no power to the motors. This was enough to not only bend the shaft of one, but also the stator (a new bell from a spare motor rubs against the magnets but works fine on its own stator). So, unfortunately, durability is lacking. I should have paid more for their more recent motors (R4 upwards) that can take some real abuse, as I found on another quad.
BrotherHobby Returner R2 2205 1750KV 3-6 S Motor Brushless CW para RC Drone FPV Racing
US$15.02 US$18.16
4
Recomendações
Comentários (1)
qnub 21/03/2019
Looks very pretty, will have to try once I get the batteries sorted out (weak point of 65mm brushles quads...).
4 pares de hélices Gemfan 1219 1,2x1,9x3 31mm buraco de 1mm de 3 pás para motor brushless de drones RC FPV 0703-1103
US$5.20 US$11.99
0
Recomendações
Comentários (1)
qnub 21/03/2019
Looks very pretty, will have to try once I get the batteries sorted out (weak point of 65mm brushles quads...).
4 Pares Gemfan 1220 1.2x2x4 31mm 1mm Hélice 4-blade Hélice para 0703-1103 RC Zangão FPV Corrida Brushless Motor
US$5.20 US$11.99
0
Recomendações
Comentários (1)
qnub 04/01/2019
Standard LiPo pack, 4WD with only two differentials (front and rear axis are coupled, nice for offroading), break function, multiple power and steering positions, what more do you want? Cons: 1. The canopy is rather flimsy, I expect it to break easily. 2. There is no indication that the car is turned on, so beware of draining the battery!
HS 18301/18302 1/18 2.4G 4WD Brinquedos de Veículo Fora de Estrada Automóvel de Corrida RC Pé Grande de Alta Velocidade
US$69.99 US$81.99
0
Recomendações
Comentários (0)
Carregador Inteligente de Bateria Lipo ISDT H605 Air 50W 5A DC 2S-6S com Bluetooth e Operação via APP
US$30.49 US$39.99

Q: Why won't the Android app run without access to my location?

perguntado por qnub sobre 2018-12-16 04:07:37

UpcounNibble Could you send the picture to us? Then we will try our best to solve your problem.

2018-12-28 02:08:25 Útil (0)
Enviar
respostas (1)
qnub 21/11/2018
Most nyloc nuts are 6mm high and are therefore not suitable with many motors and props (for example Cyclones on motors with 12mm shafts) because the plastic doesn't engage the thread of the motor. These are 4.5mm in height, making them compatible with any motor/prop combination. Slightly expensive, though.
5 PCS Gofly-RC M5 Porcas de Motor em Alumínio com Inserção de Nylon Autotravante CW/CCW para Drone de Corrida RC FPV
US$8.99 US$10.99
1
Recomendações
Comentários (0)
qnub 07/11/2018
It does come with an 8-pin cable. The connectors used on that cable are, however, cheap copies, they don't stay in place like as solidly as, for instance, those from Holybro. Haven't tested in flight yet, though, maybe it's fine anyway. I discarded the M2 hardware that comes with it, it's bad quality and therefore pretty useless.
Original Airbot Omnibus F4 Nano Controlador de Voo com Filtro LC & Ori32 4 Em 1 25A Brushless ESC
US$83.94 US$125.90
0
Recomendações
Comentários (1)
qnub 07/11/2018
Connectors are cheap copies, they don't stay in place like as solidly as, for instance, those from Holybro. Haven't tested in flight yet, though, maybe it's fine anyway.
Cabo de conexão original Airbot 3CM 8pin para o ESC sem escova Typhoon 4 In1 para o controlador de voo OMNIBUS V2 FC
US$7.99 US$9.99
0
Recomendações
Comentários (0)
qnub 02/11/2018
I thought these would be better than the KingKongs. While they are made of better material, there is just as significant unbalance in ALL of them that they are basically useless because balancing them would take too much work with sand paper.
10 Pairs Racerstar V2 5042 5x4.2x3 3 Lâmina Hélice 5.0mm Furo de montagem para RC Drone FPV Racing
US$5.97 US$9.22
0
Recomendações
Comentários (1)
qnub 19/10/2018
OK, this is my fault for not checking, but I just don't get why there aren't more, smaller hex bits included, such as 2mm, 1.5mm, 1.3mm. That would be really useful as many round-head M3 bolts have 2mm, not 2.5mm sockets.
Wowstick 1P+ 19 em 1 Parafusadeira elétrica sem fio, parafusadeira a bateria sem fio para ferramentas de reparação
US$21.99 US$39.99
0
Recomendações
Comentários (0)
qnub 15/10/2018
Despite what the product description says, there is no USB. Since WLAN is also missing compared to the full-size Runcam Split 2, the only way of getting the video footage out is by removing the microSD card, which might be difficult in certain builds. Other than that, it looks like it's a fine piece of equipment, image quality seems to be roughly equal to that of the full-size Split 2.
RunCam Split Mini 2 FOV 130 graus 1080P/60 fps HD Gravação e WDR Câmera FPV NTSC / PAL comutável
US$71.74 US$81.99
0
Recomendações
Comentários (0)
qnub 26/09/2018
These come unbalanced. All of them. And all in the same orientation. Looks like the mold isn't properly made in the first place.
10 Pares Kingkong 5040 5x4x3 3-Lâminas CW CCW Hélice de Cor Única Clara para FPV Racer
US$11.99 US$14.99
0
Recomendações
Comentários (1)
qnub 26/09/2018
Warning: this item comes with the empty battery case for 18650 batteries, not the USB-charging 1800mAh battery pack as the official HDO from Fatshark. If you're OK with that, go ahead.
FatShark Dominator HDO 4: 3 Display OLED FPV Video Goggles 960x720 para RC Drone
US$499.00 US$661.32
2
Recomendações
Comentários (0)
qnub 18/09/2018
First of all, my example causes diagonal stripes across the image. It does that with any camera and any VTX, others in the same set-up don't. Then again, the module is really fragile due to the OLED display sticking out quite far on the top. Since my OLED module broke yesterday, I removed it altogether and replaced it with a socket so I can plug a new one in (they're very cheap) should I ever need it. Then again, you have the OSD, so the only time you really need the OLED is when you've written firmware or messed something up. Why can't we have Achilles so that OSD is permanently on and can't be switched off, at least when the OLED isn't present?
Realacc RX5808-PRO-PLUS-OSD 5.8 Ghz 48CH FPV Receptor Aquiles Open Source Para Fatshark Óculos
US$57.53 US$61.99
0
Recomendações
Comentários (1)
qnub 05/09/2018
MMCX will pull clean out of the VTX on a crash, protecting the cables, VTX, and antenna. It's the way to go. Other than that, it's a Pagoda, so it's good. Nothing more to say.
Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antena 86mm MMCX Preto / Vermelho / Laranja
US$6.85 US$10.64
0
Recomendações
Comentários (0)
qnub 05/09/2018
Nice and solid. Comes with no wires soldered (but very good ones are supplied), so no need to remove them before installation. Roughly twice the size of the Kopis 1 ESCs, so I hope they last a lot longer.
4X Holybro Tekko32 35A BLHeli_32 ESC Dshot1200 2-6S Sensor de Corrente Embutido para RC Drone FPV Racing
US$64.00 US$92.99
0
Recomendações
Comentários (0)
qnub 05/09/2018
It does the job. In 2018, however, I would have expected a charger like this to include a dedicated USB port for updates (and data logging, while we are at it). Pity.
ISDT SClinker Firmware Atualizado Cabo Dados para Carregador ISDT
US$5.25 US$7.49
0
Recomendações
Comentários (0)
qnub 05/09/2018
Solid charger, very compact. Now the bad part: - discharge performance is very poor, and the fan makes a hell of a noise while discharging; - the screen gets scratched very easily. There is a protector foil included, but putting that on is pointless because the screen was dirty and scratched the minute I removed the warning sticker.
ISDT Q6 Pro BattGo 300 W 14A Bolso Lipo Bateria Carregador de Balanço
US$49.99 US$74.99
0
Recomendações
Comentários (0)
qnub 05/09/2018
Really good, WDR works fine, FOV is very nice. There is extra latency compared to simple FPV cameras, but it's about 40ms, not too bad. The only drawback is that the props tend to get in the picture because the camera is mounted where FPV cameras usually are, rather than being elevated like the classic GoPro.
RunCam Split 2 FOV 130 Graus Gravação HD 1080P/60fps com WDR 4:3/16:9 Câmera FPV Comutável NTSC/PAL para Drone RC
US$69.00 US$99.99
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe