Todas as mensagens

SKULL yes they are they are underneath the rubber bottom in their own compartment beneath the white cardboard

2021-06-30 06:54:18 Útil (0)
Enviar
respostas (5)

SKULL as your battery is forward of the cg the gyro must behind and right on or nearest to the cg which is always about 1 third back from the leading edge of the wing closest to the fuselage

2021-06-02 12:40:56 Útil (0)
Enviar
respostas (3)

Q: is one set equals three pieces?

perguntado por jherran sobre 2019-07-29 05:42:26

SKULL no idea what you mean

2021-05-04 04:53:54 Útil (0)
Enviar
respostas (1)

Q: I need 2 more lights in red. where do I find them?

perguntado por Villyf sobre 2020-07-12 04:11:53

SKULL you can jet any colour led almost any electric store or ebay

2021-05-04 04:52:51 Útil (0)
Enviar
respostas (2)

SKULL the 4mm is the size of the wire strut which you fit the landing on

2021-05-04 04:50:49 Útil (0)
Enviar
respostas (1)

SKULL if you have the pins at the rear instead of the way they are you would be very restricted for space where going up is always plenty of space rather than have all wiring getting caught up in servos and such

2021-05-04 04:47:01 Útil (1)
Enviar
respostas (1)

Q: do i need a elavon mix in my radio or will this stabilizer do the mixing for me?

perguntado por NYHobbyist sobre 2020-09-12 07:05:31

SKULL If you are flying with the controller activated it will do it for you if not you may not need any mixing depending on your flying experince

2020-09-12 08:17:13 Útil (0)
Enviar
respostas (9)

Q: is this compatible with ds6i transmitter?

perguntado por Joe sobre 2020-03-07 07:02:17

SKULL yesit is comparable with all Spektrum Transmitters

2020-08-21 08:50:11 Útil (0)
Enviar
respostas (7)

Q: How long is each light wire>?

perguntado por BG441591131 sobre 2020-07-14 10:34:30

SKULL ifthe wire is too short you can add to it if the wire too long just shorten it

2020-08-21 08:48:48 Útil (0)
Enviar
respostas (3)

SKULL youcan sign a spare channel on your receiver and transmitter to a spare switch and follow the set up on the instructions supplied

2020-08-21 08:46:50 Útil (0)
Enviar
respostas (1)