Todas as mensagens

Q: What are the dimensions?

perguntado por PinoyMatt sobre 2023-02-24 06:59:13

ngundtoft W: 97mm D:18mm H:33mm (lamps) W: 100mm (mounting frame) Br Nils

2023-02-24 09:24:51 Útil (0)
Enviar
respostas (1)

Q: what’s the shank size? not every uses a keyed chuck

perguntado por Derek Arnold sobre 2022-05-12 09:20:38

ngundtoft Hi. I also received mine in red plastic sleeves. I measured them to approx. 8.2, 8.1, 7.2, 6.9 and 6.7mm. Best regards Nils

2022-05-16 10:41:54 Útil (0)
Enviar
respostas (5)

Q: does it work with ewlink

perguntado por Pierregeweer sobre 2022-02-12 03:52:32

ngundtoft It works fine with my Google Home Assistant, but I have not tried it with Alexa.

2022-02-12 05:46:32 Útil (0)
Enviar
respostas (4)

Q: Does th thing that connects to a battery, take a Lipo battery

perguntado por BG512244571 sobre 2022-01-25 12:19:35

ngundtoft Hello. This thing runs on 4.8 to 6V from your receiver. One Lithium cell at 3.7 V is probably not enough for your receiver and two cells at 7.4V is too much for this device. So you need a regulator.

2022-01-25 03:42:49 Útil (0)
Enviar
respostas (2)

Q: Is there an option for a 3 blade prop if it comes with 2 blades??

perguntado por BG249461104 sobre 2022-01-16 10:11:44

ngundtoft I don't think you can buy a three-bladed propeller for this particular model. It has a special magnetic mounting system.

2022-01-16 01:34:38 Útil (1)
Enviar
respostas (3)

Q: What is the power consumption for this repeater

perguntado por ngundtoft sobre 2020-05-18 02:53:42

nonato6709 Energia de uma lâmpada econômica

2021-11-23 09:12:48 Útil (0)
Enviar
respostas (3)

Q: can i put these on my mn86ks?

perguntado por BG333222131 sobre 2021-11-13 02:00:49

ngundtoft Hi, is very nice, but definitely not large enough for the 1:10 scale Axial SCX10 I bought it for: I do not not know the mn86ks, so I cannot tell you if it fits, but I think it is much more suitable for a 1:12th size car. Best regards Nils

2021-11-14 11:28:07 Útil (0)
Enviar
respostas (2)

Q: Does it fit the vrx 802 ?

perguntado por BG473922162 sobre 2021-09-27 09:17:47

ngundtoft I bought this and a roof-rack that was supposed to fit my 1:10 Axial SCX10. The roof-rack was way too small, but the LED light fits nicely. For a 1:12 size model it may be a little large, but I think it will fit - width is 105mm.

2021-09-28 10:05:19 Útil (0)
Enviar
respostas (3)

ngundtoft My son bought these, but he says they are compatible.

2021-08-28 04:21:48 Útil (0)
Enviar
respostas (1)

Q: Is there option to buy extra batteries?

perguntado por BG388383705 sobre 2021-07-07 04:47:29

ngundtoft It does not appear that you can order it as a combined order, but you can just buy extra batteries ID:1601344

2021-07-07 04:51:47 Útil (0)
Enviar
respostas (3)

Q: Is it included s-fhss receiver?

perguntado por 一人 sobre 2020-03-18 06:55:03

ngundtoft This helicopter has built-in receiver. It uses OMP protocol and can be used with multi protocol radio.

2021-06-23 08:29:42 Útil (0)
Enviar
respostas (2)

Q: will this work with spektrum transmitters?

perguntado por BG485155032 sobre 2021-06-18 08:10:06

ngundtoft Yes, it says it is compatible with S BUS_DSM_DSMX receiver, Also you can use any S-bus receiver, so you can use it with almost any transmitter.

2021-06-19 02:16:48 Útil (0)
Enviar
respostas (3)

Q: Does it fits the wpl c*****:16?

perguntado por Waleed Moftah sobre 2019-05-26 11:34:11

ngundtoft This is not 1:10th scale - so maybe it will fit 1:16. I just received it and I have the Axial SCX10, which it is supposed to fit, and it does not. It is way too small. Nils

2021-04-19 04:47:05 Útil (0)
Enviar
respostas (2)