Todas as mensagens

temporalflux It says what it is for in the manual (which is linked in the listing). It is for HOVER SETTING - for calibrating a stable hover.

2020-10-15 08:57:07 Útil (0)
Enviar
respostas (3)

Q: When will the spare frame be available?

perguntado por Nico Grms sobre 2020-09-23 03:21:58

temporalflux That looks to be the Eachine Cinecan frame, which they seem to have discontinued, here: https://www.banggood.com/Eachine-Cinecan-85mm-4K-Cinewhoop-FPV-Racing-Drone-Frame-Kit-p-1546247.html?rmmds=myorder&cur_warehouse=CN Maybe they'll start stocking it again soon? However, if it is the same frame, I can tell you that is very tough, you are unlikely to break it.

2020-09-30 08:05:18 Útil (0)
Enviar
respostas (1)

temporalflux It is a 9x9mm mounting pattern. Motors with a 12x12mm mounting pattern won't fit, even if you only use 2 screws.

2020-09-24 08:59:14 Útil (0)
Enviar
respostas (2)

zotm_Bigdogge Bang Good has many such errors. They also list some plastic geared servos as metal gears, so be wary. One error is the replacement receiver brick for the Eachine Mini Mustang and Volantec Super & Sport Cubs. The page says it also works with the Eachine F-22 but that is wrong. Another error I am aware of is the Eachine Mini Corsair. The page says 3 channel but it's actually 4 channel.

2020-06-26 09:35:51 Útil (1)
Enviar
respostas (2)

Q: Can we change vtx channel/power etc via OSD (Smart Audio)?

perguntado por brdeleeuw sobre 2019-07-30 03:38:40

temporalflux I had this problem with Tramp not working and, I finally managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 10:21:04 Útil (0)
Enviar
respostas (9)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:52:16 Útil (0)
Enviar
respostas (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:57 Útil (0)
Enviar
respostas (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:36 Útil (0)
Enviar
respostas (3)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:08 Útil (0)
Enviar
respostas (3)

Hazzarino 1mm. Fit very tight. I had to break them to remove them again from the motors. Even one motor was damaged in the process as I had to use pliers. Also, not very well balanced. More vibrations than the cheap standard props.

2019-10-03 10:30:44 Útil (0)
Enviar
respostas (1)

Q: can i flash the recever with eu compatible firmware ?

perguntado por DimitriDe Puysseleyr sobre 2018-12-02 01:52:41

temporalflux Extremely doubtful, as the receiver is built into the flight control board. However, you should be able to add an external receiver - an XM, for instance.

2018-12-02 07:25:42 Útil (0)
Enviar
respostas (10)

Q: i need a DSMX version

perguntado por Vincent sobre 2018-11-02 10:29:58

temporalflux You can add an external DSMX receiver. Emax have never made a DSMX BNF (only FrSky) and, I doubt they will start now.

2018-11-03 07:33:35 Útil (0)
Enviar
respostas (5)

temporalflux You can add an external FlySky receiver. Emax have never made Flysky BNF (only FrSky) and, I doubt they will start now.

2018-11-03 07:32:04 Útil (0)
Enviar
respostas (4)