Todas as mensagens

Q: ¿Cual es la configuración para las retracciones optima?

perguntado por sarkat sobre 2021-07-07 01:48:31

Luke Direct drive is usually 1-3 mm, erring on the low side

2021-07-24 11:40:38 Útil (0)
Enviar
respostas (1)

Luke You would need new belts and threaded rods. You would need extension cables for various sensors, and probably the hot end. You would need to compile new firmware with the new dimensions. You would need to change settings in your slicer.

2021-02-22 05:24:06 Útil (0)
Enviar
respostas (2)

Q: what size can it scan

perguntado por Albert sobre 2020-12-17 03:22:02

Luke From the description: 1. Object space volume is bigger than 5 x 5cm 2. Object space volume is smaller than 20.3cm x 20.3cm

2020-12-23 12:26:18 Útil (0)
Enviar
respostas (1)

Q: is this product categorized as NAS...?

perguntado por adarnis sobre 2019-05-11 10:46:59

Luke Yes. It is a Network Attached Storage device.

2020-09-27 01:17:26 Útil (0)
Enviar
respostas (1)

Q: Does it include the black bit in the pictures for mounting correctly?

perguntado por Luke sobre 2020-01-10 03:53:16

chungr423 Thestepper motor does include the black bit for mounting. It comes already attached to the motor and it includes 2 screws and 2 washer for mounting when replacing the old stepper motor.

2020-09-01 05:29:17 Útil (0)
Enviar
respostas (3)

Brannigan this kit is OK, as it does not have the rod mount. Only the limited switch mounting is included

2020-03-19 01:17:51 Útil (0)
Enviar
respostas (1)

Q: How does the tail piece compress the spring against the head piece?

perguntado por Luke sobre 2020-01-20 08:42:23

huangliyu1 Hello. it can do that.

2020-02-12 11:42:28 Útil (0)
Enviar
respostas (1)