Todas as mensagens

Q: hi good day......this transmitter can i change to my rc truck

perguntado por Jhon D. Sabanal sobre 2018-05-12 04:39:50

VirginiaJim You need to check what protocol your truck uses. If it is AFHDS 2A, this Tx should work. Otherwise you will need to replace the truck's receiver.

2020-09-19 05:13:00 Útil (0)
Enviar
respostas (3)

Q: Are all the internal gears metal too?

perguntado por VirginiaJim sobre 2019-09-04 06:16:23

stevepayor I opened one up, and found all the gears are metal, except for the first large gear (nylon) driven by the motor pinion (brass). This is OK because the torque is low here, and the nylon gear helps keep the drive silent. All of the following gears in the gear train, running at higher torque, are metal.

2019-09-04 08:46:43 Útil (10)
Enviar
respostas (5)

Q: Does this WiFi amplifier work on both the 2.4 & 5 GHz bands?

perguntado por VirginiaJim sobre 2020-09-09 04:05:05

BG484816493 Noonly 2.4 GHz

2020-09-09 09:24:03 Útil (0)
Enviar
respostas (1)

Q: can I use it with my Android phone

perguntado por Gaurav kumar sobre 2018-08-25 01:53:31

VirginiaJim You could use this camera if it is connected to a 5.8ghz video transmitter, and you use the ROTG01 receiver, which has an output for more recent (2yr) android cell phones. Should work with Android 8.0 phones or higher. Suggest using video transmitter that runs on 7.4v or higher since these cameras require more than 5v, despite what the specs show. - Jim

2020-09-08 03:32:19 Útil (0)
Enviar
respostas (2)

VirginiaJim In my experience with 3 orange labeled Eachine 1000TVL cameras, none of them work with 5v supplied. They give a black screen. If you can still find the earlier white label of this camera (I have one), mine works with 5v input. Cheers. - Jim

2020-09-08 03:27:55 Útil (0)
Enviar
respostas (2)

Felicity Package Included: 1 x Floodlight (With remote control) 1 x solar panel 1 x Instructions 1 x Bag of components

2020-02-24 02:21:42 Útil (1)
Enviar
respostas (3)

VirginiaJim Can BangGood or the manufacturer please specify the mah capacity of the welding switch? As mentioned above, it appears that a foot activated switch is ideal. Please provide a source of such a switch. I have one I have not used in years that was intended to activate the motor when a tape recorder is set to record. Would that work or would it not have sufficient amperage capacity?

2020-09-02 12:07:25 Útil (0)
Enviar
respostas (3)

VirginiaJim I have had problems with double images on my EAT03 goggle. Have others experienced this problem? Any solutions?

VirginiaJim 2020-01-28 09:49:17
I just received my Eachine & Emax EAT03 Interrogator and I'm really impressed. Just casually testing my Tx control and video signal range I paced off between 120-125 yards/meters in a hallway of my retirement community. The design of the goggle is VERY functional, providing on screen icons for RSSI, Band name (A-F), Channel number (1-8), and actual frequency, plus a battery icon indicating charge in 25% increments. The focus was fine for me (I have near-sightedness) but not good for my friend who is far-sighted. He needed to hold the goggle about 6" from his face to get the best focus. The car is generally well designed except for these issues: 1) the plastic shell should have holes for the Vtx antenna, the Rx antenna, and for the USB charger without removing the shell. 2) setting the Vtx transmission channel with just one button is very confusing and poorly explained in the manual. Would be much better if this could be selected from a menu viewed on the goggle. 3) I don't understand how the optional LED light bullets were intended to be used. Should have been hard wired to car battery rather than requiring expensive button batteries for each light. Where are we supposed to attach them? I love that the battery bay was designed to hold a much bigger 1S battery potentially providing more driving time. The Tx controller is well designed, and simple using 3 AA batteries. The trim control for L/R steering is very useful. Proportional control of throttle and steering is surprisingly accurate. Eachine & Emax have really hit a home run with this one. Thanks for encouraging folks to try this wonderful hobby!
1
Comentários (1)
VirginiaJim 2020-01-28 09:49:17
I just received my Eachine & Emax EAT03 Interrogator and I'm really impressed. Just casually testing my Tx control and video signal range I paced off between 120-125 yards/meters in a hallway of my retirement community. The design of the goggle is VERY functional, providing on screen icons for RSSI, Band name (A-F), Channel number (1-8), and actual frequency, plus a battery icon indicating charge in 25% increments. The focus was fine for me (I have near-sightedness) but not good for my friend who is far-sighted. He needed to hold the goggle about 6" from his face to get the best focus. The car is generally well designed except for these issues: 1) the plastic shell should have holes for the Vtx antenna, the Rx antenna, and for the USB charger without removing the shell. 2) setting the Vtx transmission channel with just one button is very confusing and poorly explained in the manual. Would be much better if this could be selected from a menu viewed on the goggle. 3) I don't understand how the optional LED light bullets were intended to be used. Should have been hard wired to car battery rather than requiring expensive button batteries for each light. Where are we supposed to attach them? I love that the battery bay was designed to hold a much bigger 1S battery potentially providing more driving time. The Tx controller is well designed, and simple using 3 AA batteries. The trim control for L/R steering is very useful. Proportional control of throttle and steering is surprisingly accurate. Eachine & Emax have really hit a home run with this one. Thanks for encouraging folks to try this wonderful hobby!
1
Recomendações
Comentários (1)

Top reviewers que você pode gostar: