Opiniões dos clientes

4.78 de 5
Escrever uma crítica
  • Todos Comentários (37)
  • Imagem (7)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(37)
    • Estrela(31)
    • Estrela(4)
    • Estrela(2)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
  • February-15 2020 03:17:37

    Good product. It has small problems but finally is functional. The Z-axis motor direction was inverse. Solved with re-pin the wire connector. The vertical bakelites has a small problem, the big holes for the optical steel axis was maked on the wrong side. That is because on my machine the X-axis motor is on the left side.

  • July-19 2020 03:57:53

    overall very nice starting machine not very happy cause they didnt send correct eu plug and instructions were not all correct for example X axis motor was mounted opposite side of the machine not as shown at pictures and made assembly a bit more difficult to understand

  • February-10 2020 15:27:12

    great value for money. only received 5 out of the 10 drill bits :( but okay :) some of the parts are 3d printed but looks strong enough for the application. super easy to assemble.

  • September-30 2020 15:30:50

    OK works nice

  • March-03 2020 06:55:00

    received , working , just with some diffrents : 5 bits not 10 and the x axe inverted side and you should invert its stepper motor wires

    Comentários (1)
  • January-19 2020 12:59:18

    Fast delivery. Full package - no missing and damaged parts The assembly instructions are not 100% correct, but good enough to get working model. The X axis stepper motor is on the left bracket. By default the Z axis is reversed. Easy to fix using the "$3" command. I needed to drill the collet to 5.5 mm - it was not possiible to put it on the C motor shaft - both details 5 mm. The offline controller has priority - when connected no PC control. The controller is not high quality one. I will do a new

    Comentários (2)
  • January-12 2020 10:15:40

    Me encanta esta máquina, montaje fácil y claro con las instrucciones, funcionó a la primera y ahora la tengo con comunicación Bluetooth y probando con láser. 😄👍

  • January-06 2021 05:32:17

    Everything went fine. Quality is ok for the price. Sone parts need rework for smooth operation. The unit came without any drivers or software. So it took me some time to figure eveything out. Therefor only four stars. Important: the USB connection does not work, when the external control box is connected!!!

  • December-30 2020 06:44:02

    + gut verpackt, + großer Arbeitsraum, - Bohrungen für Parallelführung des Tisches nicht innerhalb der Toleranz, daher verspannt der Tisch sich beim Verfahren, - Alu-Frässpähne haben sich beim Transport verteilt, auch die Kugelumlaufspindeln sind verschmutzt und laufen "holprig", - teilweise falsche/zu kurze Schrauben, # Wie in der Bedienungsanleitung zu lesen, handelt es sich um ein "Spielzeug". Qualitativ fehlt diesem Bausatz und seiner Beschreibung die nötige Präzision (In einem Bild ist

  • July-27 2020 08:10:04

    overall looks like a standard 3018 pro but its a copy for a start the upright are machined wrong so you cant mount the motor on the right, the bit where you put the cutting tip the collect is too big so you cant bolt it up the hole is too small for the bit, as for mounting it on the spindle the hole is too small so will need drilling out, no cooling fan on the main board and you cant mount the board like it say in the instruction no software or driver, thats the bad bits. the machine is well made


    Total 0 pages

    Go to page


    Você pode estar interessado em

    recommendation for you
    • R$1.367,97
    • R$1.059,61
    • R$560,61
    • R$218,60
    • R$39,19
    • R$448,48
    • R$22,37
    • R$61,00
    • R$1.569,81
    • R$84,04
    • R$128,90
    • R$19,57
    • R$308,31
    • R$392,41
    • R$85,17
    • R$1.962,28
    • R$61,62
    • R$78,44