Comentários de Módulo de carregador de bateria de íon de lítio USB versão 3.2V/3.7V/4.2V com função de proteção

Módulo de carregador de bateria de íon de lítio USB versão 3.2V/3.7V/4.2V com função de proteção

US$6.15
~~US$8.15~~
Compre agora

Opiniões dos clientes

4.96 de 5

Ver todos 93 comentários

5 estrela
89 (95.7%)
4 estrela
4 (4.3%)
3 estrela
0 (0%)
2 estrela
0 (0%)
1 estrela
0 (0%)

Escrever uma crítica Obtenha o dobro de pontos de comentário,se você é um dos primeiros 3 comentários publicados!

Todos Comentários (93)
Imagem (12)
Vídeo (0)
Todas as estrelas
- Todas as estrelas(93)
- Estrela(89)
- Estrela(4)
- Estrela(0)
- Estrela(0)
- Estrela(0)

Ordenar por:

Comentários Anteriores

Comentários Anteriores
Mais úteis
Mais Recente

Comentários apenas do seu país (Brazil)

Mostrar original

Uma parte da revisão foi traduzida automaticamente.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Comentários

Mostrar original
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Comentários

Mostrar original