Opiniões dos clientes

4.97 de 5
Escrever uma crítica
  • Todos Comentários (702)
  • Imagem (74)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(702)
    • Estrela(684)
    • Estrela(18)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
  • February-22 2020 03:05:22

    Gayet güzel. Usb den yeterli akım çekebilmesi için Type-C girişi var buna dikkat edin. Lipo batarya bağlantı soketi ve kablosu da var. Açılışta logo çıkıyor sonrasında üç ana renk olan kırmızı yeşil maviye geçiş yaparak lcd ekranı test etmiş oluyor. Test bittikten sonra soldaki düğmeye basarsanız Wifi taraması yapıyor. Sağdaki de uyku konumuna alıyor.

  • August-09 2020 11:18:39

    High quality board with black coated PCB, USB-C plug is a big plus. Well placed layout, works out of the box with a simple demo app flashed. TIP: don't remove the protective film from display in a rush, do it AFTER soldering the breakout pins! This is my 3rd Lilygo TTGO board. Every one works great. This one shipped in just 2 weeks. Only Painpoint: docs and the online repo could be a bit more extensive, but the Author on GitHub is responsive so no worries. Keep in mind that the screen uses 1 SPI

    March-31 2020 11:50:32

    Ordered 20 Feb, arrived 31 Mar. well packaged. worked straight out of box. Powered from USB C and demo loads and runs. Connected to PC and com port detected. Already have ESP32 support in arduino not tried to program it yet. Need to add display and button drivers. Google LilyGO TTGO T-display. I found Joen's code snippets pages very thorough. Only real gripe is that the display panel does not sit flat on the circuit board. I bought two and they both had this issue. slightly raised on the end with

  • July-06 2020 12:55:47

    LilyGo TTGO T-Display are really nice ESP32 boards. I've bought quite a few from Banggood and they all arrived quickly, safely and all work without fault. Be aware the USB interface is USB C (nicer than micro-USB) and with Arduino there is a reliable upload. You will need to install the CP210x USB to UART Bridge VCP Drivers from silabs.com for the USB port to be recognised on your computer. The colour ST7789V display is really nice - and although it takes up a few of the ESP32 pins, there are enough

  • October-23 2020 10:50:12

    Great and powerful little ESP32 board. TFT programming is easy with Arduino GUI and TFT_eSPI library. With onboard wifi, flash, Lipo-connector and 2 buttons its nearly out-of-the-box as IoT device for sensors, automotive and smarthome displays. I just ordered another 2 for my smarthomes photovoltaic power display...

  • July-14 2020 07:44:28

    Device is great, easy to use the examples are ok and enough data on the web to program most of the features. only flaw I have found is the charging circuit, connected a 150mah battery and after several hours it started swelling. luckily i opend the device for inspection before the battery burst in flames. please check

  • December-21 2020 12:27:34

    Pequeno e rápido, tudo dentro do esperado, só USB que é tipo C, pensei que fosse microUSB.

  • November-09 2020 08:47:39

    Excellent ESP32. Les possibilités sont infinies: Domotique, petit ordinateur de poche sous micro python... etc Et pour le prix, on fonce!

  • September-13 2020 03:23:31

    Good quality, well programmable device. Practical, I'm happy with it. There are many example programs on the Internet.

  • September-06 2020 03:08:02

    arrivato funzionante in busta sigillata.display colorato. buona definizione.contento.spedizione circa 3 settimane.


    Total 0 pages

    Go to page


    Você pode estar interessado em

    recommendation for you
    • R$39,19
    • R$57,86
    • R$22,37
    • R$22,31
    • R$69,92
    • R$74,29
    • R$16,76
    • R$67,22
    • R$72,83
    • R$26,01
    • R$34,71
    • R$18,95
    • R$41,27
    • R$14,30
    • R$39,19
    • R$32,35
    • R$146,39
    • R$22,37