Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (268)
  • Imagem (41)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(268)
    • Estrela(256)
    • Estrela(9)
    • Estrela(2)
    • Estrela(1)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 05/04/2016

    This case is nice but it don’t seem to be manufactured for this component tester. It has many drawbacks. But with a little work is can work great. The first thing I noticed was there wasn’t any output for the function generator. Then the counter needed to have some strange arrangements of pin2 and 3 of the connector. Not to mention the connector is very low quality and won’t last very long with use. The two holes for the banana plugs is much larger than the plugs provided and so makes it hard to get them to line up straight on the front. That and really, it’s just an extension of 2 of the three pins on the connector so why bother? Then there is no way provided to extend the SMD test pads. All this and more really hides the quality of the component tester and its other functions. SO I first off replaced the red LED with a blue so it matches the color décor of the label. (LOL, yeah I know). Then I replaced the two banana plugs with 2 BNC and wired one to the function generator and the other to the frequency counter pins. Then I removed the junky test connector and fitted the provided zif socket. I also added 2 SMD pads so I can test simple SMD parts. Over all this works great. And might be of interest. See attached picture.

    Comentários (1)
    Mostrar original
  • 03/10/2017

    la cover si adatta perfettamente al circuito, ma bisognerebbe apportare delle modifiche alla scocca, come ho fatto. 1) inserire un terzo polo centrale per poter collegare anche il pin 2 2) inserire nel kit una femmina jack 3.5mm per poter collegare l' ingresso "F in" 3) inserire nel kit una clip per pila 9v

    Comentários
    Mostrar original
  • 12/02/2016

    Perfect for the job. This was not designed to accommodate the surface mount testing area of the testing PCB or the frequency counter, so I modded it and threw in a DC power jack and a switch to totally shut off the juice from the battery too. Sadly I did not prepare for the banana jacks melting, but I should have planned ahead and inserted banana plugs with heavy gauge wire to sink the heat, oh well, I am still happy.

    Comentários
    Mostrar original
  • 15/10/2015

    It's really a nice piece of engineering and production but there is a big information gap between the tester and the shell descriptions. The tester is working perfect and the shell is nice but I wish I knew the problems before. Two parts. of the tester, are not properly matching the shall. The LED light was soldered with too short leads (I got the shell 2 weeks after assembling the tester). Now I'll have to look for another LED. The new test socket is interfering with the assembled old one (the green socked) and I have to remove it, not an easy job but I'll manage to do it. Just waste of time and components. There are no assembly instructions, for the tester and the shell, but it was not a big problem even for an old man (80+) that likes DIY works. Now I have a design request: Please add external power connector that disconnect the internal battery and save its live.

    Comentários (2)
    Mostrar original
  • 24/07/2016

    … fits excellent. I have built a connection for an external power supply.

    Comentários
    Mostrar original
  • 30/08/2015

    nice shell all accessories included, allows the user to have a very good gadgat, with DIY 12864.

    Comentários
    Mostrar original
  • 24/07/2020

    Corresponde à descrição

    Comentários
    Mostrar original
  • 14/06/2020

    receptáculo excelente

    Comentários
    Mostrar original
  • 30/01/2020

    Vem com peças adicionais, boa qualidade, entrega muito rápida - 14 dias a partir do pedido, isso é incrível. Definitivamente eu posso recomendá-lo!!

    Comentários
    Mostrar original
  • 16/05/2018

    Boîtier sympathique parfaitement adapté à l'appareil de test composants. Montage simple et rapide. Très satisfait. Les photos ont été faites appareil assemblé avec l'électronique.

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • US$21.99
    • US$15.99
    • US$8.19
    • US$9.99
    • US$41.99
    • US$11.99
    • US$8.43
    • US$8.99
    • US$4.99
    • US$7.99
    • US$3.49
    • US$6.59
    • US$33.99
    • US$8.99
    • US$6.99
    • US$19.99
    • US$22.99
    • US$8.99