Banggood

what esc should i use? i want it to be peppy on 2s

Everything o.k....:o)

très bonne qualité merci

Preis Leistung ist TOP!!!

gfdgfd

Ordered 7 of these, but 4 exhibited extreme resistance as spinning the shaft. The motors suffered from rotor rub as the rotor was making contact with the stator coils. The rotors showed scratches after running and the motors would get very hot after running for only 25 to 30 seconds. It is possible the rotor removed some insulation from the stator causing a coil short.

Used as a replacement for my Losi Micro Rally 1/24. There aren't many brushless motors with 1.5mm diameter shafts, so this seemed appealing, and had the lower Kv rating needed to handle 3s lipo and high amp aftermarket ESC. Before I even got a chance to use, the casing where the hex screws hold the top of the motor to the rest of the casing came right off, and could not be glued together. As sidenotes, the length of the motor shaft was not long enough to completely mesh with the spur gear, and the