Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (71)
  • Imagem (8)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(71)
    • Estrela(65)
    • Estrela(3)
    • Estrela(0)
    • Estrela(2)
    • Estrela(1)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 13/07/2016

    These indeed use the lastest ESP-12F, with improved/more stable antenna and 4MB of Flash. They are not too large and allow for one free line on each side of a solderless breadboard. almost all ESP-12F pins are available (the bottom pins of the ESP-12F are not available) The reset and flash buttons are very useful. Though the 3.3v regulator consumes a bit more than expected. Great for prototyping. Some soldering is needed to attach the headers.

    Comentários
    Mostrar original
  • 31/05/2016

    I thought flashing/coding this chip would be a nightmare, but it has firmware preinstalled (no flashing required), example code is preloaded, and writing your own code is easy, there are some examples on the internet. Spent two nights investigating and I can now control relays and read temperature/humidity from a DHT11 I purchased for testing. Warning: it does not come soldered, which is a pain when testing, had to solder it.

    Comentários
    Mostrar original
  • 27/01/2017

    Güzel ve kaliteli ürün olmasına rağmen satıcıyı kınıyorum. Parçalar eksik gönderilmiş. 8 pinli erkek konnektörlerden biri gönderilmemiş. One missing piece sent (one of the 8 pin male connector not included).

    Comentários
    Mostrar original
  • 19/06/2018

    Отличный модуль. Хорошая доставка в Мытищи за две недели. Все отлично.

    Comentários
    Mostrar original
  • 02/08/2017

    very handy having reset and flash buttons on board good range and works in windows 10 no need additional drivers!

    Comentários
    Mostrar original
  • 21/08/2017

    works as it should

    Comentários
    Mostrar original
  • 21/12/2016

    Very good

    Comentários
    Mostrar original
  • 25/08/2016

    I've been testing this for my IoT projects, works as expected.

    Comentários
    Mostrar original
  • 01/09/2016

    These boards are quite a bit smaller than their big brother but still pack all the functionality. the 4MB of flash leave a lot of room for code and even smal graphics e.g. for a website. there is only a few GPIOs missing and that is basically it. I used them to control multiple LED lights and the PWM comes in handy at that task.

    Comentários (1)
    Mostrar original
  • 08/06/2016

    I only had one day to play with this, but a few quick notes-- the mini board is tiny! And instead of using the lua stuff or even the arduinio IDE, I installed the Atom text editor onto my Ubuntu linux machine, then the platformio IDE on top of that. You can find a udev rules file in the link below that will ensure your user has access to mini nodeMCU as a USB device. (Instructions as to where to put it are in the link. You only need to put this file in place once.) Next, in the platformio IDE, I created a new project and selected the "d1_mini" board type (at first I accidentally chose the "nodemcuv2" type, but the gpio numbers were wrong. Trust me, "d1_mini" is the one you want). At that point, I could load the led blink "sketch", compile, and upload it. Got the flashing blue LED! Next, I was quickly able to get the WifiManage demo/library to upload and runwperfectly, which was cool cuz my computer found the esp8266 as an AP, enter my router's password, and it connected! I think had it run as a generic web server. (again, link below) Lots of fun stuff to try still, but this seems to work well so far and has been fun for a newcomer to arduino. And you don't really need anything except for a microUSB cable for your computer. Amazing. Links: http://platformio.org/ https://github.com/platformio/platformio/blob/develop/scripts/99-platformio-udev.rules https://github.com/tzapu/WiFiManager

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • R$125,04
    • R$103,95
    • R$265,73
    • R$33,51
    • R$10,34
    • R$53,62
    • R$190,62
    • R$16,29
    • R$23,05
    • R$23,05
    • R$150,17
    • R$184,84
    • R$145,61
    • R$427,51
    • R$75,06
    • R$11,27
    • R$51,94
    • R$23,05