Módulo de matriz de pontos MAX7219 módulo de exibição de LED 4 em 1
Uma parte da revisão foi traduzida automaticamente.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
muito bom produto e bom preço. Se não sabes como isso funciona, encontrei um bom tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Se você tentar os programas e verificar que eles não funcionam com o primeiro. Tente alterar os nomes dos pinos que você usará e recarregue o programa no Arduino. Por exemplo. CS_PIN 10 PINDADO 11 CLK_PIN 13