Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (128)
  • Imagem (24)
  • Vídeo (2)
  • Todas as estrelas
    • Todas as estrelas(128)
    • Estrela(120)
    • Estrela(8)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 24/06/2018

    I got all the resistors and small capacitors in and ready to solder and then I remembered what one U-Tuber said "test test and retest at any point that will provide useful results it is much easier to test early than to troubleshoot once it is built" so I pulled all the components out and tested them so now I can restart my build.

    Comentários
    Mostrar original
  • 06/08/2017

    I bought 3 pre-order kits. They now cost less. I was thinking of using them to feed small projects to replace batteries. I think it can be fed with voltages below 24 Vac. I did a little test. Without load: Vac = 19,6 Volt --- Vcc out = 21,2 Volt With load (8 ohm and Vcc = 8 Volt then 1 A) Vac = 18,86 Volt --- Vcc (without load) = 8,04 Volt --- Vcc (with load) = 7,98 Volt. Note: The maximum current before the protection is: 8.72Volt / 8ohm = 1.09 Amper. I also tried with a lower power supply. Without load: Vac = 16,4 Volt --- Vcc out = 17,1 Volt With load (8 ohm and Vcc = 4 Volt then 0.5 A) --- Vcc (without load) = 4,02 Volt Vcc (with load) = 3,99 Volt. Considerations: I could not measure the ripple with my toy oscilloscope. The output voltage setting is rough. A multigiro or 2 in series potentiometer is preferable for a more accurate adjustment.

    Comentários
    Mostrar original
  • 25/11/2021

    Bom produto 🤩🤩🤩

    Comentários
    Mostrar original
  • 26/04/2019

    mounted all parts on pcb, tested on 24ac input.. posible to control V and I with potentiometer but the output voltage is max 6,5V ?? some problem with transistors or IC. will be easy to repair if producer attached el. drawing for pcb. lm317 get hot on o,5A load, need good bigest Radiator

    Comentários
    Mostrar original
  • 20/06/2018

    tudo certo e bem embalado, pena que os serviço de entrega do Brasil é um lixo

    Comentários
    Mostrar original
  • 15/02/2019

    just want to build one without ac transformer and able to have current limitation. DC in DC out, for noise free radio tuning etc.

    Comentários
    Mostrar original
  • 06/04/2019

    Stavebnice lineárního regulovatelného zdroej 0-30V 0-1A. Perfektně vyrobena deska plošných spojů. Otvory pro osazení součástek jsou prokoveny a upraveny pro snadné pájení. Koupil jsem dva kusy - vše OK. Uvítal bych dodání schéma pro snadnější hledání závady.

    Comentários
    Mostrar original
  • 18/03/2018

    Like description!!!! I test whith old transformer single 14.4v AC waiting new 12-0-12 40w to arrive. Looks like everthing work good.

    Comentários
    Mostrar original
  • 18/03/2018

    Arrived in good conditions. Assembled (to easy actually) and testing whith old transformer 14.4 v single. Looks like work properly. Waiting to arrive new double transformer 12-0-12v AC 30w. Order new kitt to make one home made power bench supply.

    Comentários
    Mostrar original
  • 17/03/2018

    Habe mit diesen Bausätzen mein neues Universal - Netzteil bestückt Makel: trotz genug Versorgungsspannung aus beiden Netzteilen nur 17,9 Volt

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • US$15.99
    • US$13.59
    • US$4.99
    • US$41.99
    • US$4.99
    • US$43.99
    • US$13.59
    • US$10.99
    • US$18.99
    • US$9.99
    • US$6.30
    • US$6.99
    • US$7.99
    • US$9.99
    • US$5.99
    • US$19.99
    • US$34.99
    • US$7.99