Banggood

the item arrived too soon.. i have tried i am satistief the result.. thank seller

looks as described 🙂

arrived safely , not had chance to test it yet

good

Nice GBRL controller. Would be good for making a plotter like device. Good to make a small CNC engraving device. And a Laser engraver device. There are more devices you could apply the controller to, as these were common choices. 3 axis or stepper, 4 motor(2 as Y axis). Includes hookup wires. Has output to drive DC spindle motor or a Laser (with PWM) The power button on the board should have it handy if desire to power down board. Included USB cable to connect to the host.

adding the 3rd driver allows you to use the Z axis addon and helps with laser cutting with many passes I can also now add a small motor to use it as a light duty router. Comes with nice usb cable and also motor and laser cables so that if you are making your own and using this board you already have the connectors. Overall well packed and delivery time was slightly over the advertised time(took 23 days)not as long as other things i have ordered.

Türkiye’ye yaklaşık 3 haftada teslim edildi, iki eksenli lazer gravürü üç eksen yapmak için satın aldım ve kullanıyorum, herhangi bir sorunla karşılaşmadım.

after being stupid and choosing the wrong driver..... Firmware: NANO328P/LXNANO + LX-Nano.328p.20150626.hex Settings: X Y Step 2 I 3 dir 5 I 6 Rest depends on maschine. hope it helps :)

Had tested the laser voltage output from the board and it seems weak function is not responding as output does not change for normal & weak. will try to check it with laser itself & yet to test the motor functionality. 12V fan has 10.+V out. It would be better if laser output can be controlled by pwm.

Electronics work, but its assembly is poor. Cold solder, elements protruding from PCB, crooked soldered.