This is a good quality 3D printed module case and fits the intended module perfectly. But neither the case or module come with the screws required to fit it all together. Also no mention of the required screw size. This will require something like some 2mm self tapping screws (I assume by looking at it). This really should be supplied with the 7 screws required - would make life a LOT easier than trying to find some of these tiny screws. Still happy with the purchase but screws would have made things much better!

This is a good quality 3D printed module case and fits the intended module perfectly. But neither the case or module come with the screws required to fit it all together. Also no mention of the required screw size. This will require something like some 2mm self tapping screws (I assume by looking at it). This really should be supplied with the 7 screws required - would make life a LOT easier than trying to find some of these tiny screws. Still happy with the purchase but screws would have made things much better!

This is a good quality 3D printed module case and fits the intended module perfectly. But neither the case or module come with the screws required to fit it all together. Also no mention of the required screw size. This will require something like some 2mm self tapping screws (I assume by looking at it). This really should be supplied with the 7 screws required - would make life a LOT easier than trying to find some of these tiny screws. Still happy with the purchase but screws would have made things much better!

Fits fine only downside is its missing screws in the set. Maybe change the cover to a snapping version so you don't need to search for screws.

Fits fine only downside is its missing screws in the set. Maybe change the cover to a snapping version so you don't need to search for screws.

Fits fine only downside is its missing screws in the set. Maybe change the cover to a snapping version so you don't need to search for screws.

Had to file the inside corners a little bit in order to easily fit the 4-in-1 module, as I didn't want to force the module into it. Fits into the Turnigy 9X module bay without any issue, and the antenna can be swiveled left-, right- and upwards with reasonable degree of room.

Had to file the inside corners a little bit in order to easily fit the 4-in-1 module, as I didn't want to force the module into it. Fits into the Turnigy 9X module bay without any issue, and the antenna can be swiveled left-, right- and upwards with reasonable degree of room.

Had to file the inside corners a little bit in order to easily fit the 4-in-1 module, as I didn't want to force the module into it. Fits into the Turnigy 9X module bay without any issue, and the antenna can be swiveled left-, right- and upwards with reasonable degree of room.

parece se encaixar bem e funções como anunciado.

Seems to fit nice and functions as advertised.

parece se encaixar bem e funções como anunciado.

Works as intended, for the peeps who don't have any screws, then you could order http://www.banggood.com/Eachine-Racer-250-Drone-Spare-Part-M2_58-M38-M2_55-Screw-Set-p-1010219.html?rmmds=search at the same time, just use the M2 ones and keep the rest as a 'these will come in handy some day'

Works as intended, for the peeps who don't have any screws, then you could order http://www.banggood.com/Eachine-Racer-250-Drone-Spare-Part-M2_58-M38-M2_55-Screw-Set-p-1010219.html?rmmds=search at the same time, just use the M2 ones and keep the rest as a 'these will come in handy some day'

Works as intended, for the peeps who don't have any screws, then you could order http://www.banggood.com/Eachine-Racer-250-Drone-Spare-Part-M2_58-M38-M2_55-Screw-Set-p-1010219.html?rmmds=search at the same time, just use the M2 ones and keep the rest as a 'these will come in handy some day'

Excelente acabamento, muito resistente, encaixe bom no rádio, cabe corretamente a pcb do multiprotocolo, pelo valor deveria vir a antena mas igual recomendo, útil.

Excelente acabamento, muito resistente, encaixe bom no rádio, cabe corretamente a pcb do multiprotocolo, pelo valor deveria vir a antena mas igual recomendo, útil.

Excelente acabamento, muito resistente, encaixe bom no rádio, cabe corretamente a pcb do multiprotocolo, pelo valor deveria vir a antena mas igual recomendo, útil.

è di buona fattura e si incastra molto bene, completo di due gusci fronte e retro e una serie di viti insomma colpeto ho aggiungi una centralina multiprotocollo e installato nella taranis x7

è di buona fattura e si incastra molto bene, completo di due gusci fronte e retro e una serie di viti insomma colpeto ho aggiungi una centralina multiprotocollo e installato nella taranis x7

è di buona fattura e si incastra molto bene, completo di due gusci fronte e retro e una serie di viti insomma colpeto ho aggiungi una centralina multiprotocollo e installato nella taranis x7

petit boitier pour protocole multi module , qui s'adapte parfaitement sur la radio. c'est parfait.

petit boitier pour protocole multi module , qui s'adapte parfaitement sur la radio. c'est parfait.

petit boitier pour protocole multi module , qui s'adapte parfaitement sur la radio. c'est parfait.

This case is perfect for the 4-in-1 module Purchased through Banggood. The case fits perfectly with my Turnigy 9xR Pro.

This case is perfect for the 4-in-1 module Purchased through Banggood. The case fits perfectly with my Turnigy 9xR Pro.

This case is perfect for the 4-in-1 module Purchased through Banggood. The case fits perfectly with my Turnigy 9xR Pro.

This fits my Taranis Plus perfectly! The only gripe is about the screws as mentioned before. I had some screws for the props on a Syma x11 and they fit "ok" in all 7 screw holes. Not perfect but good enough. I wish that screws were included or even if they were sold separately that would work. Overall super happy! It's a bit of a tight fit with 4 in 1 multiprotocol, but it fit in! Super happy!

This fits my Taranis Plus perfectly! The only gripe is about the screws as mentioned before. I had some screws for the props on a Syma x11 and they fit "ok" in all 7 screw holes. Not perfect but good enough. I wish that screws were included or even if they were sold separately that would work. Overall super happy! It's a bit of a tight fit with 4 in 1 multiprotocol, but it fit in! Super happy!

This fits my Taranis Plus perfectly! The only gripe is about the screws as mentioned before. I had some screws for the props on a Syma x11 and they fit "ok" in all 7 screw holes. Not perfect but good enough. I wish that screws were included or even if they were sold separately that would work. Overall super happy! It's a bit of a tight fit with 4 in 1 multiprotocol, but it fit in! Super happy!