Opiniões dos clientes

4.87 de 5
Escrever uma crítica
  • Todos Comentários (1047)
  • Imagem (110)
  • Vídeo (2)
  • Todas as estrelas
    • Todas as estrelas(1047)
    • Estrela(949)
    • Estrela(76)
    • Estrela(13)
    • Estrela(6)
    • Estrela(3)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • fhaman
    2019-11-25 15:59:52

    Fast Shipping, Excellent filament. Printed easily with minimal stringing. My settings were 200°C Hot End, 50°C Bed Temp, 60mm/s print speed. Though I highly recommend learning how and printing a temperature tower, as thermal measurement at that scale is not precise so your printer may vary some.

    Comentários (1)
  • quim_55
    2020-06-28 07:30:37

    It arrived well, I printed a temp tower and in the high temperatures (more than 200°C) the plastic has a strange effect. For my printer 190°C seems to be the best. Color is really similar than the artilley genius as you can see, so it's great to make printer parts. It's more expensive that the other spool of Smart materials I have, and I did not had any issues with the temperature in the Smart materials spool. I'll probably buy it again just because of the color, not for the filament quality

  • Raphi
    2020-04-10 05:27:29

    It is a rather inferior filament so it can form small bubbles. Otherwise I'm surprised by the quality. Would recommend it as the first filament because it is easy to print.

  • 2020-08-26 03:34:15

    very happy with this filament for my first 3D prints, I used a bed temp of 75 for the first layer, dropping to 68. hot end was set to 200. only question marks I had were that the packaging describes this as PLA-S not PLA

  • 2020-05-13 15:36:06

    The quality of the PLA itself is good, in my case, to print COVID visors, it sticks correctly to the hotbed at 40°C and melt well at 200°C on my Geeetech. I cannot set the 5 stars unfortunately because the wire winding is almost random with the wire sometimes tightening on itself and breaking, I lost a few pieces because of that. You can see photos of wires crossing (that is next round of wire comes on top of wire being unwound).

  • 2020-03-30 10:23:37

    Very happy with this filament. Use it with my Artillery Genius 3d printer. Did already buy 4 different colours. Quite brittle, so not good for printing mounting brackets or stuff that has to withstand a lot of force and bumps. But very nice for printing toys and similar things. I get very good results with this Anet filament. Color white use lower print temperature than with clear and grey.

  • 2020-07-14 13:02:46

    could be winded little better, but the quality is very good for the price. printed with cura on artillery genius.

  • 2020-04-28 10:49:17

    Accepted the shipment ... thank you. PLA filament of good quality and easy to use. Experimental print at 205/55 temperatures, glass grip very good, printed product excellent. I recommend both the product and the dealer.

  • 2020-04-25 12:51:04

    recibido a tiempo y parece de buena calidad sigo a la espera de mi ender 3 pro que la pedí al mismo tiempo pero sigo sin recibirla, volveré a opinar cuando pueda probarlo.

  • Sutnar
    2020-03-31 09:48:18

    Vlákno od ANET je asi nejlepší co jsem používal. Dávám 5 *.


    Go to page


    Você pode estar interessado em

    recommendation for you
    • R$274,24
    • R$218,26
    • R$212,20
    • R$302,44
    • R$254,65
    • R$194,01
    • R$181,88
    • R$56,28
    • R$17,04
    • R$20,38
    • R$133,36
    • R$231,67
    • R$187,94
    • R$181,88
    • R$130,27
    • R$194,01
    • R$121,23
    • R$20,19