Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (20)
  • Imagem (5)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(20)
    • Estrela(19)
    • Estrela(0)
    • Estrela(0)
    • Estrela(1)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 06/06/2018

    Yesterday I have got the board and Display. The first impression is, that the display is very sensitive, but It works very nicely. The high resolution is very impressive. To start the setup, I must use different web - pages to find the right connectivity. THE SETUP IN THE PICTURES HERE ARE INCORRECT! The cable between the HDMI2MIPI board and the connector converter board must be attached as in the attached pictures. Please improve the documentation! With documentation is this display a full 5-star product. Additional info: the board needs only 12V DC. At room temperature and active display consumes it around 250mA.

    Comentários (1)
    Mostrar original
  • 04/08/2018

    One of the best small displays availble in the market But this one is small and had A wonderful DPI ..Best Resolution than any other available Diy displays...best for 3d printer or LCD Projectors... Note:- This Display only works With Computer not suitable for setup boxes or any other hdmi sourcesconnect it to the hdmi output Directly from your pc or form gpu then switch on your pc (Disconnect other displys if you have multi disply setup) the display will work Directly as a Standalone Display.

    Comentários (2)
    Mostrar original
  • 01/07/2020

    Um grande ecranzinho. Você utiliza algum digitalizador USB que possa ser usado com a tela?Ou conhece um fornecedor? Mesmo que fosse apenas uma alta definição em vez de uma alta definição dupla que a tela é. Muito obrigado F

    Comentários (1)
    Mostrar original
  • 29/01/2019

    Now got allready the second item. The first converter board died after a short cut. The complete converter board will be hot after 3 - 5 minutes running. keep this in mind if You want to add it into a box. The resolution is stil amazing.

    Comentários
    Mostrar original
  • 03/10/2018

    display working fine now. good quality display for good price.

    Comentários (1)
    Mostrar original
  • 07/06/2021

    O produto é excelente. Considerando a fragilidade do produto, a embalagem poderia ter sido melhor. Ainda bem que o recebi em segurança e a trabalhar.

    Comentários
    Mostrar original
  • 14/08/2018

    The product is great, like described. For better experience, could be provide a manual or video with instructions. The board voltage is 12v, for use in 3D printer you need to remove the back. The LCD is very tiny, so take careful! I don't found the glass protector in Bangood, so I had to buy somewhere else.

    Comentários (2)
    Mostrar original
  • 04/08/2018

    Many People Saying Connected properly But Display is Black Back light is on.For them this Display will only works with computer HDMIMostly it Will not support Any other types of HDMI sources..first remove other Connected Displays of your cpu and connect this Display only and Switch on the pc...If the disply is Not working Check it with ur Friends Computer some time Your Graffics Adaptor may not support this Display in Rare cases...Its the one of the Best and Stable Display without Any Errors...

    Comentários
    Mostrar original
  • 09/09/2018

    The first consignment arrived with a non-functional display, but the supplier quickly sent the second one and it works well. Working with raspberry. Care must be taken to ensure that the connectors are properly inserted and, when moving the PCB, check that they are not pulled. Communication with support deserves a reward.

    Comentários
    Mostrar original
  • 09/09/2018

    The first consignment arrived with a non-functional display, but the supplier quickly sent the second one and it works well. Working with raspberry. Care must be taken to ensure that the connectors are properly inserted and, when moving the PCB, check that they are not pulled. Communication with support deserves a reward.

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai
    recommendation for you
    • US$19.99
    • US$2.59
    • US$109.99
    • US$13.99
    • US$14.99
    • US$5.99
    • US$8.99
    • US$10.99
    • US$25.51
    • US$15.11
    • US$389.00
    • US$559.00
    • US$369.99
    • US$7.99
    • US$289.00
    • US$2.49
    • US$2.09
    • US$18.99