Opiniões dos clientes

4.96 de 5
Escrever uma crítica
  • Todos Comentários (436)
  • Imagem (44)
  • Vídeo (1)
  • Todas as estrelas
    • Todas as estrelas(436)
    • Estrela(418)
    • Estrela(18)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • OLEG
    RU
    November-11 2020 01:49:13

    все получил

    Comentários
  • January-17 2020 11:33:47

    Immer wieder gerne gekauft. Tolle Netzteile in kleinstem Format und guter Leistung.

    Comentários
  • September-13 2017 11:02:37

    I tested it with a 12Vdc power source and all the 3 power supply circuits work like a charm. the voltage adjustment is easy. satisfied and suggested ho testato i 3 circuiti con una sorgente a 12Vdc e tutti e 3 hanno funzionato perfettamente. la regolazione con trim multigiri è OK. soddisfatto e suggerito come acquisto

    Comentários (1)
  • October-17 2017 13:17:26

    The product comes in antistatic bags. I tested all three of them and work perfect! I connected in 12V to 15V DC Power Supply as Input Source, I’ adjusted for 5V Output and connected in 2.2A load. Works Very Good, I measure a little bit of noise (20 – 35 mVpp) in the Output but this is right for this switch type converters. Quick tip: connect an Inductor same type as that who is mounted in the board in series with the (+) of output, and then connect a couple of capacitors (one 100uF Electrolytic

    Comentários
  • January-14 2018 14:57:19

    This step down converter has very good efficiency! Compared to other products rated at "3 to 4 amp" this has 92% efficiency (the weaker ones with LM2496 only get 81%). Tested using 10,5 Volt input and 7 Volt output at 1.93 amps. You can see in the picture it has plenty of room for more power as it is not getting very hot even without any heat sink or moving air.

    Comentários
  • August-29 2017 21:50:28

    These are a very handy stable voltage converter. I mainly use them for 5V USB or similar devices that I want to power from my 12V house DC or a car battery. They generate a little noise of course, but if put into a di-cast box with ferrite beads on the leads in & out they're pretty good if you run HF radios in the area.

    Comentários
  • May-23 2016 08:43:51

    Work fine. Good soldering. Starts warming at 3A. Got holes for mounting. The are is no current limits. Хорошое исполнение. Начинает нагриватся при 3А. Есть два отверствия для крипежа. Жаль что НЕТ ограничения тока. Подходит для простого блока питания

    Comentários
  • November-17 2017 16:46:13

    Very stable and precisely adjustable DC convector. the best I've ever used.

    Comentários
  • September-24 2017 09:18:33

    Useful product! I used adjust V from 3.7v lithum -ion battery to 3.0 v ,so lightting my LED bulb.See my pic.

    Comentários
  • March-14 2017 07:15:17

    Perfecto para conseguir voltajes intermedios a partir de una fuente de alimentación ATX, soporta hasta 5A y es muy chiquitin.

    Comentários
Show:

    Go to page

    Go

    Você pode estar interessado em

    recommendation for you
    • R$22,19
    • R$27,76
    • R$7,51
    • R$37,99
    • R$94,51
    • R$11,07
    • R$56,63
    • R$13,29
    • R$32,48
    • R$39,66
    • R$27,76
    • R$43,00
    • R$38,88
    • R$100,07
    • R$15,85
    • R$22,19
    • R$16,63
    • R$9,40