Opiniões dos clientes

4.9 de 5
Escrever uma crítica
  • Todos Comentários (71)
  • Imagem (6)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(71)
    • Estrela(64)
    • Estrela(7)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Brazil)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 08/02/2019

    Very good items, now I can start to realize the links for my scaler's project. It arrived in 38 days.

    Comentários
    Mostrar original
  • 02/09/2019

    Comforme à la description 👌

    Comentários
    Mostrar original
  • 20/02/2019

    They work great on my SCX10 and look go too

    Comentários
    Mostrar original
  • 14/12/2018

    bellissime da vedere e pronte per essere utilizzate in vari progetti rc

    Comentários
    Mostrar original
  • 20/07/2018

    pièces bien realisées elles sont parfaites pour upgrader les 1/10e

    Comentários
    Mostrar original
  • 13/05/2018

    mejor de lo esperado x el precio

    Comentários
    Mostrar original
  • 13/09/2020

    sustentável.

    Comentários
    Mostrar original
  • 26/07/2020

    produto conforme descrito Parece-se decente

    Comentários
    Mostrar original
  • 17/04/2018

    I was refurbishing an old model car I fitted the new ball joints in the suspension pushrod I just tested the suspension operation on the table pushing down 4-5 Times by hand the locking rings were pushed out of the aluminium head 3 of 4 joints broken just pushing by hand ! The push rods are working quite straight the original parts were Made with plastic. the locking ring is just pressed in the aluminum head the axial force produces a lateral force that push out the ring. But this is the normal operation of a uniball. Assembly/manufacturing method is wrong I am a retired mechanical engineer. the parts look were pretty but useless even for a static model. Money lost.

    Comentários (2)
    Mostrar original
  • 06/02/2018

    If you want to use these for any precise stuff just know they are pretty loose. On the other hand, they nearly fit into an M6 holes. If you drill them out it's a pretty tight fit, so it's pretty good for diagonal rods of a 3d printer - just buy some M8, 1mm wall thickness aluminium pipes (M6 inner diameter), cut them to length, drill out the ends with a slighty oversized M6 drill bit and it'll work pretty well.

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • R$108,85
    • R$19,45
    • R$82,92
    • R$108,85
    • R$56,99
    • R$939,69
    • R$295,53
    • R$1.303,47
    • R$150,33
    • R$222,93
    • R$360,87
    • R$181,45
    • R$1.011,15
    • R$1.607,50
    • R$342,20
    • R$565,19
    • R$238,49
    • R$98,48